Engine Installation

SAFETY FIRST: Protective gloves and eyewear are recommended at this point.

Insert all engine mounting bolts from the left side. Use new nuts with the engine mounting bolts.

Position the swingarm pivot bolt so that it is only through the left side of the frame and swingarm.

Use a jack to help you guide the engine into position.

Insert the swingarm pivot bolt through the engine mount and the right side of the frame. Place the washer on the end of the bolt and thread on the nut...

Install the fuel tank. See the Fuel Tank topic for more information.

Install the exhaust system. See the Exhaust System topic for more information.

Install the side covers. See the Side Covers topic for more information.

Install the seat. See the Seat topic for more information.

Fill the engine oil. See the Engine Oil topic for more information.

- - - To Continue Reading, Subscribe Now - - -

This is an abridged sample manual from Cyclepedia Press LLC.

See more at - http://www.cyclepedia.com/online-manuals/

Note: If you are viewing this document offline be sure to visit the latest version online at http://www.cyclepedia.com before attempting any repairs. Updates are made without notice.